COSMOSTAR HULK 65:1 Airless Sprayers / Airless Paint Sprayers offer highly reliable performance even in the harshest environment. Combination of extreme pressure ratio, high flow rate and rugged design make HULK 65:1 Airless Sprayers ideal for handling extremely viscous fluids. COSMOSTAR HULK 65:1 Airless Sprayer is the answer for your heavy-duty spray applications.
Typical Applications
COSMOSTAR 65:1 Airless Sprayer Video
Category | Data | ||||
---|---|---|---|---|---|
Air Motor Diameter | 10 inches (Hulk) | ||||
Pressure Ratio (Fluid to Air) | 65:1 | ||||
Maximum Fluid Working Pressure | 360 Bar (5220 PSI) | ||||
Maximum Air Input Pressure | 5.5 Bar (80 PSI) | ||||
Maximum Volume Flow Rate | 12.0 LPM | ||||
Maximum Recommended Pump Speed | 60 CPM | ||||
Fluid Outlet Size | 1 npt(f) |
Air Inlet Size | 3/4 npt(f) |
Fluid Inlet Size | 1-1/2 npt(f) |
COSMOSTAR CY- 1156 Walker 11.5HP Gas-Powered Airless Sprayer
Tough sprayer perfected with high mobility
We proudly present WALKER; COSMOSTAR Gas-Powered Airless Sprayer that works under the heaviest environment while maintaining reliable performance, high durability and efficiency. WALKER is our answer of the demand of high quality yet mobile spraying machine. The combination of rugged design and high quality Gas Engine provides a reliable system that does the job whenever and wherever perfection is required.
Feature and Benefits
· Higher pressure ratio for higher flows, longer lines and better atomization
· Wide spraying and coating covered area
· High mobility to work under the harshest environment
Typical Applications
· Marine and shipyard
· Off-shore
· Railcars and other transport vehicles Chemical and petrochemical plants
· Public works facilities
· Pulp and paper mills
· Nuclear and conventional power facilities
· Pipeline
· Metals and mining
Typical Fluids Handled
· Asphalt
· High solids epoxy primers and coatings
· High solids polyurethane coatings
· Waterborne coatings
High Way Guardrail Anti Corrosion Project in Taipei City, Taiwan
Technical Data
Engine Capacity |
11.5HP Honda |
Maximum Working Pressure |
3600PSI (220 Bar) |
Maximum volume flow rates |
11.5 LPM |
Fluid inlet size |
1 npt(f) |
Fluid outlet size |
3/4 npt (f) |
Weight |
120kg |
CosmoStar CY-1300-AA 30:1 Air-assisted airless sprayer
Designed to fine finishing quality and productivity
COSMOSTAR CY-1300AA 30:1 air-assisted airless sprayer applies air-assisted technology allows our customer to spray with the highest finishing quality, speed and transfer efficiency. Connect with CY-0925 high pressure fluid regulator with air-assisted spray gun to improve transfer efficiency and reducing paint material cost.
COSMOSTAR air-assistant system has great fluid stability function, unlike other competitor instead of high pressure regulator to other un-functional stabilizer. As the picture shows, our system installs with high pressure regulator has great more than 90% stability than other competitor install without regulator. If you want to improve your finish line quality and productive, CosmoStar air-assistant system is the best choice for all fine finishing user.
Feature and Benefits
· High quality finish
· Increase productivity
· Reducing paint material cost
· Easy maintenance
· Save Time and Money
Typical Applications
· Wood furniture and cabinetry finishing applications
· High quality finishing process
· General metal finishing applications
Typical Fluids Handled
· Catalyzed lacquers
· Shear-sensitive coatings
· Waterborne lacquers
COSMOSTAR CY-1300AA Air-Assisted Airless Sprayer Application
Technical Data
Air motor diameter |
6 in (COMPACT) |
Pressure ratio |
30:1 |
Maximum Working Pressure |
3600 PSI (240 Bar) |
Maximum Air Input Pressure |
120 PSI ( 8 Bar) |
Maximum volume flow rates |
4 LPM |
Maximum Pump Speed |
60 CPM |
Air inlet size |
3/8 or 1/4 npt(f) |
Fluid inlet size |
3/4 npt(f) |
Fluid outlet size |
3/8 npt(f) |
High pressure fluid regulator |
CY-0925 |
CosmoStar CY-0110 Hulk 10" 45:1 Pneumatic Airless Sprayer
It takes a tough sprayer to handle a tough job
COSMOSTAR HULK 45:1 Airless Sprayers offer highly reliable performance even in the harshest environment. Combination of extreme pressure ratio, high flow rate and rugged design make HULK 45:1 Airless Sprayers ideal for handling extremely viscous fluids. COSMOSTAR HULK 45:1 Airless Sprayer is the answer for your heavy-duty spray applications.
Feature and Benefits
· Higher pressure ratio for higher flows, longer lines and better atomization
· Wide spraying and coating covered area
Typical Applications
· Marine and shipyard
· Off-shore
· Rail cars and other transport vehicles Chemical and petrochemical plants
· Public works facilities
· Pulp and paper mills
· Nuclear and conventional power facilities
· Pipeline
· Metals and mining
Typical Fluids Handled
· Industrial protective coatings
· High solids epoxy primers and coatings
· High solids polyurethane coatings
· Waterborne coatings
COSMOSTAR Airless 45:1 Application
Technical Data
Air motor diameter |
10 in (HULK) |
Pressure ratio |
45:1 |
Maximum Fluid Pressure |
5220 PSI (360 Bar) |
Maximum Air Input Pressure |
116 PSI ( 8 Bar) |
Maximum volume flow rates |
15.2 LPM |
Maximum Recommended Pump Speed |
60 CPM |
Air inlet size |
3/4 npt(f) |
Fluid inlet size |
1-1/2 npt(f) |
Fluid outlet size |
1 npt (f) |
COSMOSTAR CY-0670 10" Plural Component Proportioning Pump
Excel with Cosmostar’s Heavy Duty Fixed Ratio Plural-Component Proportioning Pump!
The COSMOSTAR CY-0670 Plural-Component Sprayer is designed for spraying high viscosity fluid, high solid content material coating. The gravity feed, flush pump and fluid heater can be implemented to achieve variety functionality equipment to face the hardest environment and any coating application. High volume mechanical proportioner that replaces the manual pre-mixing of plural component materials and reduces the cost of wasted paint and labor.
Features and Benefits
· High resistance and durability
· Two- and three-lower designs achieve a wide variety of mix ratios
· Three-lower design provides mix ratios above 1:1 for balanced pumping
· Provides accurately mixed and proportioned material on demand
· Reduces material and solvent waste
Typical Applications
· Plural component materials
· Protective coatings
· Farm and construction equipment
· Truck and bus
· General metal fabrication
· Foam and elastomeric
Applicable Coatings
· Foam and elastomeric
· Applicable Coatings
· Epoxies
· Polyurethanes
· Waterborne
· Acid-catalyzed wood finishing materials
· Stains, lacquers and varnishes
· Sealants and adhesives
COSMOSTAR CY-0670 10" Plural Component Proportioning Pump Application
Technical Data
Air motor diameter |
10 in (HULK) |
Pressure ratio |
75:1 |
Maximum Fluid Working Pressure |
7250 PSI (500 Bar) |
Maximum Air Input Pressure |
96 PSI (6.6 Bar) |
Maximum volume flow rates |
8.5 LPM |
Air inlet size |
3/4 npt(f) |
Fluid inlet size |
3/4 npt (f) |
Maximum Operating Temperature |
82°C (180°F) |
COSMOSTAR CY-0610 Plural Component Proportioning Pump
Excel with Cosmostar’s Fixed Ratio Plural-Component Proportioning Pump!
The COSMOSTAR CY-0610 Plural-Component Sprayer is designed for spraying high viscosity fluid, high solid content material coating. The gravity feed, flush pump and fluid heater can be implemented to achieve variety functionality equipment to face the hardest environment and any coating application.High volume mechanical proportioner that replaces the manual pre-mixing of plural component materials and reduces the cost of wasted paint and labor.
Features and Benefits
· High resistance and durability
· Two- and three-lower designs achieve a wide variety of mix ratios
· Three-lower design provides mix ratios above 1:1 for balanced pumping
· Provides accurately mixed and proportioned material on demand
· Reduces material and solvent waste
Typical Applications
· Plural component materials
· Protective coatings
· Farm and construction equipment
· Truck and bus
· General metal fabrication
· Foam and elastomeric
Applicable Coatings
· Foam and elastomeric
· Applicable Coatings
· Epoxies
· Polyurethanes
· Waterborne
· Acid-catalyzed wood finishing materials
· Stains, lacquers and varnishes
· Sealants and adhesives
COSMOSTAR CY-0610 Plural Component Airless Sprayer Application
Technical Data
Air motor diameter |
10 in (HULK) |
Pressure ratio |
65:1 |
Maximum Fluid Working Pressure |
5050 PSI (350 Bar) |
Maximum Air Input Pressure |
80 PSI (5.5 Bar) |
Maximum volume flow rates |
7.3 LPM |
Air inlet size |
3/4 npt(f) |
Fluid inlet size |
3/4 npt (f) |
Maximum Operating Temperature |
82°C (180°F) |
CosmoStar CY-1300 Compact 6" 30:1 Pneumatic Airless Sprayer
For durability, power and reliability under tough working conditions with affordable price
COSMOSTAR COMPACT 30:1 Airless Sprayer is built to satisfy the need of low cost sprayers. Designed with a compact size, COMPACT 30:1 Airless Sprayer are suitable for high mobility usage. When low cost, easy maintenance and mobility is your main preferences, COMPACT 30:1 Airless Sprayer is surely the best thing you can get.
Feature and Benefits
· Low maintenance cost
Easy maintenance
· Compact volume
· High mobility
Typical Applications
· New construction and maintenance
· Bridge painting
· Tank manufacturing and maintenance
· General metal fabrication and maintenance
· Farm and construction machinery manufacturing
· Rail car manufacturing
Typical Fluids Handled
· Industrial protective coatings
· High solids epoxy primers and coatings
· Urethane coatings
COSMOSTAR CY-1300 Airless Sprayer Application
Technical Data
Air motor diameter |
6 in (COMPACT) |
Pressure ratio |
30:1 |
Maximum Fluid Work Pressure |
3600 PSI (240 Bar) |
Maximum Air Input Pressure |
120 PSI ( 8 Bar) |
Maximum volume flow rates |
4 LPM |
Maximum Pump Speed |
60 CPM |
Air inlet size |
3/8 or 1/4 npt(f) |
Fluid inlet size |
3/4 npt(f) |
Fluid outlet size |
3/8 npt(f) |
CosmoStar CY-1450 4" Econ 23:1 Pneumatic Airless Sprayer
For durability, power and reliability under tough working conditions with affordable price
COSMOSTAR ECON 23:1 Airless Sprayer is built to satisfy the need of low cost sprayer. Designed with a compact size, ECON 23:1 airless sprayers are suitable for high mobility usage. When low cost, easy maintenance and mobility are your main preferences, ECON 23:1 Airless Sprayer is surely the best thing you can get.
Feature and Benefit
· Low cost (economics)
· Easy maintenance
· Compact volume
· High mobility
Typical Application
· New construction and maintenance
· Bridge painting
· Tank manufacturing and maintenance
· General metal fabrication and maintenance
· Farm and construction machinery manufacturing
· Rail car manufacturing
Typical Fluids Handled
· Industrial protective coatings
· High solids epoxy primers and coatings
· Urethane coatings
CosmoStar CY-1450 4" Econ 23:1 Application
Technical Data
Air motor diameter |
4 in (ECON) |
Pressure ratio |
23:1 |
Maximum Fluid Pressure |
2300 PSI (160 Bar) |
Maximum Air Input Pressure |
100 PSI ( 7.0 Bar) |
Maximum volume flow rates |
2.0 liters per min |
Maximum Pump Speed |
75 cycles per min; |
Air inlet size |
3/8 or 1/2 npt(f) |
Fluid inlet size |
3/4 npt(f) |
Fluid outlet size |
3/8 npt(f) |